BJRBX - PUROLITE ION EXCHANGE RESIN
- MSDS: BJRBX
- Manufacturer: BRO TECH CORP DBA PUROLITE CO
- Product Name: PUROLITE ION EXCHANGE RESIN
- National Stock Number: 6810-00-181-8322
Product Identification
Product ID:PUROLITE ION EXCHANGE RESIN
MSDS Date:02/05/1987
FSC:6810
NIIN:00-181-8322
MSDS Number: BJRBX
Responsible Party
BALA-CYNWYD, PA 19004-1713
US
Emergency Phone: 215-668-9090
Info Phone: 215-668-9090
Cage: 0A5A0
Contractor
Telephone: 610-668-9090
Cage: 67168
Ingredients
ION EXCHANGE RESIN
Fraction By Weight: 100%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: LIKE OTHER FOREIGN BODIES,
PARTICLES MAY CAUSE MECHANICAL IRRITATION OF THE EYE.
Explanation of Carcinogenicity:NOT RELEVANT
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. CONSULT MD IF IRRITATION PERSISTS. INGEST: CALL MD
IMMEDIATELY .
Fire Fighting
Flash Point:NONE
Extinguishing Media:CO*2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:WEAR NIOSH/MSHA APROVED PRESSURE DEMAND SCBA
AND FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS.
Other Precautions:STORE BELOW 49C (120F) AND ABOVE OC (32F).
Exposure Controls
Respiratory Protection:NONE
Ventilation:LOCAL EXHAUST-NORMAL PLANT VENTILATION.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:CLEANLINESS IS RECOMMENDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
pH:5-7
Solubility in Water:INSOLUBLE
Appearance and Odor:AMBER SPHERICAL BEADS WITHOUT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT WITH CONCENTRATED NITRIC ACID, OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES OVER 220C (428F)
Hazardous Decomposition Products:SO*2, SO*3, CO, CO*2, STYRENE MONOMER,
DIVINYLBENZENE
Disposal
Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY
TRASH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.